Python range() Explained with Examples (2024)

Python range() function generates the immutable sequence of numbers starting from the given start integer to the stop integer. The range() is a built-in function that returns a range object that consists series of integer numbers, which we can iterate using a for loop.

In Python, Using a for loop with range(), we can repeat an action a specific number of times. For example, let’s see how to use the range() function of Python 3 to produce the first six numbers.

Example

# Generate numbers between 0 to 6for i in range(6): print(i)Code language: Python (python)

Output

012345

Note: As you can see in the output, We got six integers starting from 0 to 5. If you notice, range() didn’t include 6 in its result because it generates numbers up to the stop number but never includes the stop number in its result.

The range() works differently between Python 3 and Python 2.

See range() in Python 2

• In Python 2, we haverange()andxrange()functions to produce a sequence of numbers.
• In Python 3xrange()is renamed torange()and originalrange()function was removed. We will discuss it in the later section of the article.

How to use range() function in Python

Syntax

Below is the syntax of the range() function.

range(start, stop[, step])Code language: Python (python)

It takes three arguments. Out of the three, two are optional. The start and step are optional arguments and the stop is the mandatory argument.

Parameters

• start: (Lower limit) It is the starting position of the sequence. The default value is 0 if not specified. For example, range(0, 10). Here, start=0 and stop = 10
• stop: (Upper limit) generate numbers up to this number, i.e., An integer number specifying at which position to stop (upper limit). The range() never includes the stop number in its result
• step: Specify the increment value. Each next number in the sequence is generated by adding the step value to a preceding number. The default value is 1 if not specified. It is nothing but a difference between each number in the result. For example, range(0, 6, 1). Here, step = 1.

Return Value

It returns the object of class range.

print(type(range(10)))# Output <class 'range'>Code language: Python (python)

Steps to use range() function

range() Examples

Now, let’s see all the possible scenarios. Below are the three variants of range().

range(stop)

When you pass only one argument to the range(), it will generate a sequence of integers starting from 0 to stop -1.

# Print first 10 numbers# stop = 10for i in range(10): print(i, end=' ')# Output 0 1 2 3 4 5 6 7 8 9Code language: Python (python)

Note:

• Here, start = 0 and step = 1 as a default value.
• If you set the stop as a 0 or some negative value, then the range will return an empty sequence.
• If you want to start the range at 1 use range(1, 10).

range(start, stop)

When you pass two arguments to the range(), it will generate integers starting from the start number to stop -1.

# Numbers from 10 to 15# start = 10# stop = 16for i in range(10, 16): print(i, end=' ')# Output 10 11 12 13 14 15Code language: Python (python)

Note

• Here, the step = 1 as a default value.
• The range will return an empty sequence if you set the stop value lesser than the start.

range(start, stop, step)

When you pass all three arguments to the range(), it will return a sequence of numbers, starting from the start number, increments by step number, and stops before a stop number.

Here you can specify a different increment by adding a step parameter.

# Numbers from 10 to 15# start = 10# stop = 50# step = 5for i in range(10, 50, 5): print(i, end=' ')# Output 10 15 20 25 30 35 40 45Code language: Python (python)

Note:

• Here, the step = 0 as a default value.
• Python will raise a ValueError exception if you set the step to 0.

Points to remember about range() function

• The range() function only works with the integers, So all arguments must be integers. You can not use float numbers or any other data type as a start, stop, and step value. Please refer to generate a range of float numbers in Python
• All three arguments can be positive or negative.
• The step value must not be zero. If a step=0, Python will raise a ValueError exception.

# start = 9# stop = 100# step = 3 (increment)for i in range(9, 100, 3): print(i)Code language: Python (python)

for loop with range()

Python for loop executes a block of code or statement repeatedly for a fixed number of times. We can iterate over a sequence of numbers produced by the range() function using for loop.

Let’s see how to use for loop with range() function to print the odd numbers between 1 and 10. Using this example, we can understand how the iterator variable i is getting value when we use range() with for loop.

for i in range(1, 10, 2): print("Current value of i is:", i)Code language: Python (python)

Output

Current value of i is: 3Current value of i is: 5Current value of i is: 7Current value of i is: 9

To understand what for i in range() means in Python, we need first to understand the working of the range() function.

The range() function uses the generator to produce numbers. It doesn’t generate all numbers at once.

As you know range() returns the range object. A range object uses the same (small) amount of memory, no matter the size of the range it represents. It only stores the start, stop and step values and calculates individual items and subranges as needed.

I.e., It generates the next value only when for loop iteration asked for it. In each loop iteration, It generates the next value and assigns it to the iterator variable i.

• As you can see in the output, the variable i is not getting the values 1, 3, 5, 7, and 9 simultaneously.
• In the first iteration of the loop value of i is the start number of a range.
• Next, In every subsequent iteration of for loop, the value of i is incremented by the step value. The value of i is determined by the formula i = i + step.

So it means range() produces numbers one by one as the loop moves to the next iteration. It saves lots of memory, which makes range() faster and more efficient.

Iterate a list using range() and for loop

You can iterate Python sequence types such as list and string using a range() and for loop.

When you iterate the list only using a loop, you can access only items. When you iterate the list only using a loop, you can only access its items, but when you use range() along with the loop, you can access the index number of each item.

The advantage of using range() to iterate a list is that it allows us to access each item’s index number. Using index numbers, we can access as well as modify list items if required.

Example

Pass the count of total list items to range() using a len() function. The range() will use it as a stop argument.

list1 = ['Jessa', 'Emma', 20, 30, 75.5]# iterate a list using range()for i in range(len(list1)): print(list1[i])Code language: Python (python)

Output:

JessaEmma203075.5

Practice Problem

1 2 2 3 3 3 

for num in range(4): for i in range(num): print(num, end=" ") print() # new line after each row to show pattern correctlyCode language: Python (python)

Reverse range

You can display the sequence of numbers produced by a range() function by descending order or reverse order.

You can use the following two ways to get the reverse range of numbers in Python.

• Use a negative step value
• Use a reversed() function

Using negative step

Use a negative step value in a range() function to generate the sequence of numbers in reverse order. For example, range(5, -,1, -1) will produce numbers like 5, 4, 3, 2, and 1.

I.e., you can reverse a loop by setting the step argument of a range() to -1. It will cause the for loop to iterate in reverse order.

Let’s see how to loop in a reverse iteration or backward iteration to display a range of numbers from 5 to 0.

# reverse range using negative step# start = 5# stop = -1# step = -1for i in range(5, -1, -1): print(i)Code language: Python (python)

Output:

543210

Using reversed() function

Using Python’s built-in reversed() function, you can reverse any sequence such as list or range.

• Pass the range() as an input to the reversed() function, It returns a range_iterator that accesses the sequence of numbers provided by range() in the reverse order.
• Next, iterate the result provided by reversed() function using for loop.

Example 2: reverse range starting from 20 to 10

for i in reversed(range(10, 21)): print(i, end=' ')# Output 19 18 17 16 15 14 13 12 11 10Code language: Python (python)

Example 3: reverse range starting from 20 to 10 with step 2

for i in reversed(range(10, 21, 2)): print(i, end=' ')# Output 20 18 16 14 12 10Code language: Python (python)

Note: The reversed(range(n)) returns a range_iterator that accesses the sequence of numbers provided by range() in the reverse order.

print(type(range(0, 5)))# Output <class 'range'>print(type(reversed(range(0, 5))))# Output <class 'range_iterator'>Code language: Python (python)

Also, If you need the list out of it, you need to convert the output of the reversed() function to list. So you can get the reverse list of ranges.

Use range() to reverse a list

Use range() to reverse a list by passing the count of list items as a start argument and step as a -1.

Let’s see the various ways to reverse a list of numbers using a range()

list1 = [10, 20, 30, 40, 50]# start = list's size# stop = -1# step = -1# reverse a listfor i in range(len(list1) - 1, -1, -1): print(list1[i], end=" ")# Output 50 40 30 20 10Code language: Python (python)

Python range step

A step is an optional argument of a range(). It is an integer number that determines the increment between each number in the sequence. i.e., It specifies the incrementation.

You can also define it as a difference between each preceding and next number in the result sequence. For example, If the step is 2, then the difference between each preceding and following number is 2

The default value of the step is 1 if not specified explicitly.

Example: Increment using step

# range() step with default valuefor i in range(10): print(i, end=' ')# Output 0 1 2 3 4 5 6 7 8 9# Increment in range() with step = 2# print table of 2 using range()for i in range(2, 22, 2): print(i, end=' ')# Output 2 4 6 8 10 12 14 16 18 20Code language: Python (python)

You can also perform lots of operations by using step arguments such as reverse a sequence such as a list and string.

Decrementing range() using step

You can decrement range() by using negative step value.

When we set the negative value to step, In each iteration, the number will go down until it reaches to stop number.

# Decrement range() using step# start = 30, stop = 20# step = -2for i in range(30, 20, -2): print(i, end=' ')# Output 30 28 26 24 22Code language: Python (python)

Note: To decrement range() the start must be greater than stop. A range() return empty sequence if start < stop.

for i in range(20, 30, -2): print(i, end=' ')Code language: Python (python)

Also, you can use step to generate sequence of numbers multiply of n.

# Generate integers multiply by 7for i in range(7, 77, 7): print(i, end=' ')# Output 7 14 21 28 35 42 49 56 63 70Code language: Python (python)

Also, you will get a valueerror if you set step = 0.

for i in range(1, 5, 0): print(i, end=' ')# Output ValueError: range() arg 3 must not be zeroCode language: Python (python)

Also, you can’t use the decimal step value. If you want to use the float/decimal step in the range(), please refer to generating a range of float numbers.

Negative range() in Python

You can use negative integers in range().

Most of the time, we use the negative step value to reverse a range. But apart from the step, we can use negative values in the other two arguments (start and stop) of a range() function.

Example: Negative range from -1 to -10

Let’s see the example to print the range of numbers from negative to positive.

# negative range from -1 to -10for i in range(-1, -11, -1): print(i, end=', ')# Output -1, -2, -3, -4, -5, -6, -7, -8, -9, -10Code language: Python (python)

Let’s understand the above program, we set –

• start = -1 (because we wanted to start producing number from -1)
• stop = -11 (We want to stop generating numbers when we reach -11)
• step = -1

Execution:

• In the 1st iteration of the loop, i is -1
• In the 2nd iteration of for loop, i is -2 because -1+(-1) = -2, and it will repeat this process till the stop number.

Example: Negative reverse range from -10 to -1

You can also print the negative reverse range() using a positive step integer.

# negative range from -10 to -1# start = -10# stop = 0# step = 1for i in range(-10, 0): print(i, end=', ')# Output -10, -9, -8, -7, -6, -5, -4, -3, -2, -1,Code language: Python (python)

Combination of negative and positive numbers

# stat = 2, stop = -5, step = -1for i in range(2, -5, -1): print(i, end=", ")# Output 2, 1, 0, -1, -2, -3, -4,Code language: Python (python)

Convert range() to list

Python range() function doesn’t return a list type. It returns an immutable sequence of integers.

We can convert range() to list using a list() constructor.

• Pass the range() function as an input to the list constructor.
• The list() constructor automatically creates a list by enclosing the integers returned by the range() inside the square brackets.

# create list from range()sample_list = list(range(2, 10, 2))print(type(sample_list))# Output <class 'list'># display listprint(sample_list)# Output [2, 4, 6, 8]# iterate listfor item in sample_list: print(item)Code language: Python (python)

Access and modify list item using range()

Also, you can use range() to access and modify list items.

• Using a len() function, you can get a count of list items.
• Next, use this count as a stop number in range() and iterate for loop stop-1 times.
• In each iteration, you will get the index number of a current list item.

# create list from range()sample_list = list(range(10, 100, 10))# iterate and modify list item using range()# double each list number# start = 0, stop = list size, step =1for i in range(0, len(sample_list), 1): sample_list[i] = sample_list[i] * 2# display updated listprint(sample_list)# Output [20, 40, 60, 80, 100, 120, 140, 160, 180]Code language: Python (python)

Inclusive range

In this section, we will learn how to generate an inclusive range in Python. By default, The range(n) is exclusive, so it doesn’t include the last number in the result. It creates the sequence of numbers from start to stop -1.

For example, range(5) will produce [0, 1, 2, 3, 4]. The result contains numbers from 0 to up to 5 but not five.

If you notice, the result contains 5 elements which equal to len(range(0, 5)). Note, the index always starts from 0, not 1.

If you want to include the end number in the result, i.e., If you want to create an inclusive range, then set the stop argument value as stop+step.

Example

# inclusive rangestart = 1stop = 5step = 1# change stopstop += stepfor i in range(start, stop, step): print(i, end=' ')# Output 1 2 3 4 5Code language: Python (python)

Example 2: Even inclusive range()

step = 2for i in range(2, 20 + step, step): print(i, end=' ')# Output 2 4 6 8 10 12 14 16 18 20Code language: Python (python)

range() vs. xrange() in Python 2

The range() vs xrange() comparison is relevant only if you are using Python 2 and Python 3. If you are not using Python 2 you can skip this comparison.

The range() function works differently between Python 3 and Python 2. If your application runs on both Python 2 and Python 3, you must use range() instead of xrange() for better code compatibility.

In Python 2, we have range() and xrange() functions to produce a sequence of numbers.

In Python 3 xrange() is renamed to range() and original range() function was removed.

So in simple terms, xrange() is removed from Python 3, and we can use only the range() function to produce the numbers within a given range.

Use of range() and xrange()

• In Python 2, range() returns the list object, i.e., It does generate all numbers at once. The range(1, 500) will generate a Python list of 499 integers in memory. So It consumes high memory and increases the execution time.
• xrange(): The xrange(1, 500) function doesn’t generate all numbers at once. It produces numbers one by one as the loop moves to the next number. So it consumes less memory and resources.

Example

print 'Python 2 range'print range(10)print type(range(10))print 'Python 2 xrange'for i in xrange(10): print iprint type(xrange(10))Code language: Python (python)

Output

Python 2 range()[0, 1, 2, 3, 4, 5, 6, 7, 8, 9]type 'list'Python 2 xrange() 0 1 2 3 4 5 6 7 8 9type 'xrange'

Concatenating the result of two range()

Let say you want to add range(5) + range(10,15). And you want the concatenated range like[0, 1, 2, 3, 4, 10, 11, 12, 13, 14].

For example, you want to add the result of two range() functions to produce another sequence of numbers. You can add/merge the result of multiple range() functions using itertools.chin().

from itertools import chain# Concatenate rangesnew_range = chain(range(5), range(5, 10))for num in new_range: print(num, end=' ')# Output 0 1 2 3 4 5 6 7 8 9Code language: Python (python)

range() indexing and slicing

Built-in function range() is the constructor that returns a range object, this range object can also be accessed by its index number using indexing and slicing.

Access range() attributes

It is essential to know the range() attributes when you receive it as input to your function, and you wanted to see the value of the start, stop and step argument.

range1 = range(0, 10)# access range() attributesprint(range1.start) # 0print(range1.stop) # 10print(range1.step) # 1Code language: Python (python)

Indexing

range() supports both positive and negative indices. The below example demonstrates the same.

In the case of range(), The index value starts from zero to (stop). For example, if you want to access the 3rd number, we need to use 2 as the index number.

range1 = range(0, 10)# first number (start number) in rangeprint(range1[0])# access 5th number in rangeprint(range1[5])# Output 5# access last numberprint(range1[range1.stop - 1])# Output 9Code language: Python (python)

Negative indexing

The numbers can be accessed from right to left by using negative indexing.

# negative indexing# access last numberprint(range(10)[-1])# Output 9# access second last numberprint(range(10)[-2])# Output 8Code language: Python (python)

Slicing

Slicing a implies accessing a portion from range()

# slicingfor i in range(10)[3:8]: print(i, end=' ')# output 3 4 5 6 7Code language: Python (python)

range() over character or alphabet

Is there a way to print a range of characters or alphabets? For example like this.

for char in range ('a','z'): print(char)Code language: Python (python)

Is there a way to print a range of characters or alphabets? For example like this. It is possible to create a range of characters using the custom generator. Let’s see how to generate the ‘a’ to ‘z’ alphabet using the custom range() function.

Note: We need to use the ASCII value and then convert the ASCII value to a letter using a Chr() function.

# range from 'a' to 'zdef character_range(char1, char2): for char in range(ord(char1), ord(char2) + 1): yield (char)for letter in character_range('a', 'z'): print(chr(letter), end=', ')Code language: Python (python)

Output

a, b, c, d, e, f, g, h, i, j, k, l, m, n, o, p, q, r, s, t, u, v, w, x, y, z, 

Summary

I want to hear from you. What do you think of this guide on Python range()? Let me know by leaving a comment below.

Also, try to solve the Python loop Exercise and for loop Quiz.

Below is the summary of all operations that we learned in this lesson

FAQ